High Tech Line RIP

the all-track-freeride-board
139 x 42,5 cm

Which kind of rider can use the RIP 39?

  • Beginner 90%
  • Intermediate 100%
  • Experts 90%

  • Freeride 100%
  • Freestyle 90%
  • Wave 85%
  • Race 70%

Perfect Freeride Board

The RIP 39 is the best Freeride Board you can get. It works in nearly all conditions. You can ride it without any effort and feel home from the first moment.

Huge Windrange

The RIP 39 has a huge wind range it works really great. It starts at low winds and has that kind of control you are searching for in strong and gusty conditions.

Upwind Performance

The RIP 39 has a scoop line for the best upwind performance to put you windwards without stress. The sharp edges are supporting that.

No Spray

The rails of RIP 39 are shaped with a tucked under edge, a bend in the rounded rail at the centre section. That provides you from spray. In addition to that the boards rides smoother through chop.

Easy Jumping

The RIP 39 helps you to make huge jumps. The outline of the board makes the edging easy and let you fly. Landing is also great, as the 3D-shape at the base side absorbs all bumps.


If you search for a kiteboard with the best possible comfort even in very choppy conditions then the RIP 39 is the best board you can get. The flex and the shape are designed for this task.

Pure Fun


Advanced Jet Bottom

This Shape-Detail describes a double concave channel on the base side of the board. It allows the board to plane more freely and earlier. The profile of the double concave is not a simple radius. The Spleene developed Advanced Jet Bottom has a parabolic shape. Compared to a normal double concave the Advanced Jet Bottom provides significantly more “edge bite” as it channels the waterflow along its edges. Even in choppy conditions the difference is very noticeable. The evolution of the base side shape see picture below. Click to enlarge.

Beveled Rail

A slightly lift egdewise at the base side which generates a lot more comfort in choppy conditions and more comfort.

Stepless 3D Deck

Stepless 3D-Shape on top side. All transitions are without any step. This results simultaneously in a clear reduction of weight.


All Spleene Boards are produced with a form-glued, CNC-milled woodcore.


The perfect day


What Our Customers Are Saying

The new RIP 39 is the consolidation of the last years RIP 37 and RIP 40. It has nearly the same performance, but feels like a small board. In chop it works same comfortable like the RS boards. A must have. Pal

Riding the new RIP 39 is pure fun. No chop can stop this great board. Great wind range and lots of performance. Markus

After 2 years riding all High Tech Line RIP boards it was amazing for me to see that there is always an improvement possible. The new RIP 39 has extended my expectations by far. Kalle

Choose the right size

Please check the right size for your weight

Ride the RIP 39 today

Search Test Center